Home > News > Content
Is The Blow-molding Machine Divided Into Three And Four Stations?
- Jun 19, 2018 -

Is the blow-molding machine divided into three and four stations?Let's see, injection molding machine is a combination of injection molding machine and blow molding machine/structure, including plasticizing mechanism, hydraulic system, control electric appliance and other mechanical parts.Common types are three-station injection molding machines and four-station injection molding machines.Three working machine have three type precast slab, huff and stripping station, 120 ° apart each work station.The four location machine a preforming more Labour, 90 ° apart each work station.In addition, there are double location of sensors' 180 ° apart injection blow molding machine.The plastic container produced by injection molding machine is accurate in size, no secondary processing is required, but the mould cost is high.The special structure blow molding machine is a blow molding machine with special shape and use of hollow body with sheet material, melt material and cold blank.Because the shape and requirements of the products produced are different, the structure of the blow molding machine is also different.The number and type of extruder should be determined when the extruder suitable for blowing machine is designed.The design principle of the extruder is.It can meet the plasticizing requirements of different flow rates and materials, and its productivity should be higher than that of the standard extruder.The structure of screw rod and cylinder is different with the nature of processing materials.Each extrusion device should be equipped with automatic control of the quantitative hopper to accurately control the amount of feeding.