Home > News > Content
Energy Saving Effect Of Extrusion Blow Molding Machine
- Jan 04, 2018 -

Extrusion blow molding machine energy saving can be divided into two parts: one is the power part, one is the heating part.

Power part of the energy-saving: most of the inverter, energy-saving method is by saving motor energy consumption, for example, the actual power of the motor is 50Hz, and you actually need only 30Hz in production is enough, and those extra energy consumption in vain Wasted, the inverter is to change the power output of the motor to save energy. Heating part of the energy-saving: Most of the heating part of the energy-saving use of electromagnetic heaters, energy-saving rate of about 30% -70% of the old resistance ring.

1. Compared to the resistance heating, electromagnetic heater more than a layer of insulation, heat utilization increased.

2. Compared to the resistance heating, electromagnetic heaters directly affect the tube heating, reducing heat transfer loss of heat.

3. Compared to the resistance heating, electromagnetic heater heating faster than a quarter, reducing the heating time.

4. Compared to the resistance heating, electromagnetic heater heating speed, production efficiency is increased, so that the motor is in saturation, so that it reduces the power loss caused by high power and low demand. The above four points is like a flying electromagnetic heater, why the energy saving in the blow molding machine up to 30% -70% of the reasons.