Automatic Extrusion Blow Molding Machine

1L 5L automatic extrusion blow molding machine automatic extrusion blow molding machine The 2L-16L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of 2L, 5L, 10L...

Send Inquiry
Product Details

1L 5L automatic extrusion blow molding machine

automatic extrusion blow molding machine

The 2L-16L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of 2L, 5L, 10L and  16L. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 16L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.

Setting:
Clamping------------Double station+ Hight-precision guide+ large arm cylinder axle  
Extrusion system--Hard gear surface reducer Japan inverter  
Die system----------Central-incoming extrusion die with special steel 
Hydraulic system--Japan hydraulic valve seal and proportional control 
Control system----Japan PLC+ Imported HMI+PLC automatic

Top punching devices for neck, shoulder and handle with electro pneumatic control, including electro pneumatic control for cooling of flash and blowing away Bottom punching devices include counter support pneumatically spring loaded with electro pneumatic control. Driven by pneumatic cylinder Vertical adjustment for different article length

The hydraulic unit is driven by servo variable speed pump. This Shaped Engineering Blow Molding Machine provides higher efficiency and save 40% of energy. Specially designed hydraulic unit, with less load and heating, energy saving Bosch Rexroth valve, quick response and high accuracy Stable operating system, PLC automatically control oil temperature. Oil absorbing and returning filters to keep oil clean and protect hydraulic unit, extending service time of oil and related parts

Austrian B&R control system with PLC control, convenient to check or adjust temperature, speed and time, etc. 10.4FT displayer with clear definition, easy for data storage and adjustment Embedded 100-point parison control system, well-distributed thickness and cost saving Fault diagnosis and alarms automatically are displayed on screen. Analyze and correct parameters by ADSL connection

Hot Tags: automatic extrusion blow molding machine, China, suppliers, manufacturers, factory, made in China
Inquiry